PGA 3510 Operations Manual
Super Systems Inc.
Page 7 of 42
Basic Operating Description
The Model PGA 3510 has been designed for the simultaneous analysis of CO, CO
2
and CH
4
in heat-treat
furnace atmosphere gases. It uses a color touch screen display / operator interface for data entry and for
viewing. Selections can be made on the screen using a finger or a stylus. Avoid the use of sharp objects
(pens, paperclips, screwdrivers, etc.) as they can cause permanent damage to the screen and void the
warranty of the instrument.
After the power switch is turned on, it will take approximately 30 seconds for the PGA 3510 software to
automatically load. Once the software is properly loaded, the instrument is ready to use. When the
power switch is turned off, the PGA 3510 initiates a controlled shutdown procedure which takes about 15
seconds. Following the controlled shutdown, the instrument will completely turn off.
Hydrogen Cell Note:
For highest H
2
accuracy, it is recommended that the instrument be powered on for 60 minutes before
measurements are taken.
Default Screen
Once the PGA 3510 has successfully loaded its software, the default screen will be displayed.
A – Measured values of CO, CO
2
, and CH
4
(and H
2
, if the H
2
sensor is present)
B – Pump status indicator / Button to change pump status
C – Button to access menu list
D – Session status indicator
E – Temperature / Instrument Temperature indicator
F – Button for Carbon Calculation screen
G – Automatic Carbon Calculation Adjustment indicator
H – External Instrument Communications status indicator
I – Measured value of Oxygen
J – Button for Trend Chart screen
K – Numeric Flow indicator
L – Visual Flow indicator