Super Power SP3500WS, Руководство пользователя

Страница: 11 / 22

11/22
Use gasoline with a pump octane rating of 86 or higher.
We recommend unleaded gasoline because it produces fewer engine and spark plug
deposits and extends exhaust system life.
Never use stale or contaminated gasoline or oil/gasoline mixture. Avoid getting dirt
or water in the fuel tank.
Battery Connections for Electric Starter (applicable types)
Use a 12 ‐ volt battery with an ampere ‐ hour rating of at least 18 Ah.
Be careful not to connect the battery in reverse polarity, as this will short circuit the
battery charging system. Always connect the positive (+) battery cable to the battery
terminal before connecting the negative ( ‐ ) battery cable, so your tools cannot
cause a short circuit if they touch a grounded part while tightening the positive (+ )
battery cable end.
A battery can explode if you do not follow the correct procedure, seriously injuring
anyone nearby.
Keep all sparks, open flames, and smoking materials away from the battery.
1) Connect the battery positive (+ ) cable to the starter solenoid terminal as shown.
2) Connect the battery negative ( ‐ ) cable to an engine mounting bolt, frame bolt, or
other good engine ground connection.
3) Connect the battery positive (+ ) cable to the battery positive (+) terminal as
shown.
4) Connect the battery negative ( ‐ ) cable to the battery negative ( ‐ ) terminal as
shown.
5) Coat the terminals and cable ends with grease.
Powering 12 Volt DC tools and Equipment:
1. Prior to powering tools and equipment, make sure the generator’s rated voltage,
and amperage capacity (12V DC) is adequate to supply all electrical loads that the
unit will power. If powering exceeds the generator’s capacity, it may be
necessary to group one or more of the tools and/or equipment for connection to
a separate generator.