Please view our video which will be extremely helpful
for assembly and operation of the Super Feeder (http://
www.super-feeder.com/video.html).
STEP 1
Install one clear extension on feeder and secure it with
one small 3/16" screw and washer on back side only,
opposite side of chute opening. All screws and washers
can be found in the feeder hardware bag. (See Fig. 1).
Note: Make absolutely sure the extensions and/or
hopper are firmly pressed together and each little screw
will protrude into the other part’s recessed half-moon
slot when screwed in.
STEP 2
Install the “L” bracket with four 3/8" long screws located
in feeder hardware bag (see Fig. 2).
STEP 3
Install metal retaining strap with one small 3/16" screw
and no washer on front side. Make sure the hole of the
metal strap is closest to the bottom of the strap. (See
Fig. 3)
STEP 4
Install “L” bracket and metal retaining strap to the
stand as directed by Super Feeder stand assembly
instructions, see page 6. For other stand mount of your
own, see page 5.
STEP 5
Plug power adapter plug into feeder jack. (See Fig. 4)
Plug power adapter directly into wall outlet, and feeder
should “dry” run for one cycle along with a steady
“power-on” green or blue light in housing (depending
on model).
STEP 6
Adjust black food “volume” screw so opening between
roller and gate is about the size of food, but so it does
not drop straight through. Turn food “volume” screw
clockwise to close gate more or counter-clockwise to
open gate more. (See Fig. 5)
Caution! Make sure volume screw is securely inserted
in housing at all times. If gate is fully opened, at first sign
that the gate no longer moves back, then the screw no
longer serves its purpose. Remove it from the housing
Super Feeder Installation
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Page 3
Hole toward bottom
