My Lite X3 - 3000mw RGB Laser - Instruction Manual Ver:2019.04.18
15
/
16
160
～
191 180 degrees rotating speed selection
192
～
223 Reverse rotation speed selection Horizontal rotating
position selection
224
～
255 Forward rotation speed selection Vertical rotating
speed selection
CH7
Pattern HR
Horizontal
rotating
0
～
127 Horizontal flip Angle selection
128~255 Horizontal flip speed selection
CH8
Pattern VR
Vertical flip
1
～
127 Vertical flip angle selection
128
～
255 Vertical flip speed selection
CH9
Pattern HB
Horizontal
movement
1
～
127 Horizontal moving position selection
128
～
255 Horizontal moving speed selection
CH10
Pattern VB
Vertical moving
1
～
127 Vertical moving position selection
128
～
255 Vertical moving speed selection
CH11
SI pattern
zooming
1
～
127 Pattern size selection
128
～
159 Zoom out speed selection
160
～
191 Zoom in speed selection
192
～
255 Zooming speed selection
CH12
Pattern DR
gradually
painting
1
～
255 Gradually painting speed selection
CH13 Pattern BE Spot
effects
1
～
255 Scanning speed selection
CH14
Pattern CO
color
0
～
63
Fixed color selection
64
～
127 Color change speed selection
128
～
223 Speed selection of flow speed
224
～
255 Gradually painting speed selection
Maintenance
To prolong the life of the product, it is very important to do maintenance work. The environment is
hash outdoors, or if the product is idle for a long time, damp, smoke or particularly dirty
surroundings can cause greater accumulation of dirt on its cover and housing. So it should be
cleaned to maintain an optimum light output and at the same time to prevent it from corrupted by
acid gas.
Cleaning frequency depends on the environment in which the fixture operates. Soft cloth and
typical glass cleaning products should be used for cleaning. It is recommended to clean product at
least once every 20 days.
Friendly notice: Do not use any organic solvent, e.g. alcohol to clean housing of the apparatus.
