4
2
Product Installation
2.1
Power Connection Method
Please connect power as following
：
L
（
live wire
）
=brown wire E
（
earth wire
）
=yellow/green double color wire N
（
null line
）
=blue wire
When connecting power, ensure that the voltage and frequency of power supply match the power
requirement of the product.
This equipment belong to class 1 protection equipment, therefore, the yellow-green double colors wire
must be earthed correctly by qualified personnel. Before installation, ensure that the voltage and
frequency of power supply match the power requirements of product. In power supply and voltage
fluctuation large areas, we suggest you to use 110V or 230V or use voltage regulator to supply power.
After electrical connection, this product will have a few seconds self-check action, self-check finished
can be used.
Important: It is essential that Yellow/green double color wire is correctly
earthed and that electrical installation conforms to all relevant
standards.
2.2
DMX Connection Method
2.2--1 Set the DMX512 address code (3CH MODE), as below:
v
The DMX interface of lamp needs be connected to the DMX
controller.
v
Since 3CH MODE has 3 channels, the address code with 3
increment increasing progressively (e.g.,1,4,7,10...).
v
Every DMX address code can be reused as needed.
v
DMX address code can be any data between 001 and 512.
Содержание LD616-31106
Страница 9: ...8 4 Control Channel 4 1 DMX Channel Table...
