manualshive.com logo in svg

Super B SB12V100E-ZC, Руководство пользователя, Страница: 30 / 48

Поделиться
Скачать
Super B SB12V100E-ZC Скачать руководство пользователя страница 30

30

Disconnecting the Li-ion battery

1.  Turn off any device or charger the Li-ion battery is connected to.
2.  Disconnect the negative wire from the - terminal of the Li-ion battery. 
3.  Disconnect the positive wire from the + terminal of the Li-ion battery. 

 
 
 
 
 
 
 

5.  Battery use 

5.1.  General information 

!

 Warning!

 Always use a Battery Disconnect device.

!

 Caution!

 In case of an undervoltage shutdown, charge immediately.

!

 Warning!

 Follow the safety guidelines and measures of chapter 3

5.2.  Charging

!

 Warning!

 Never charge the Li-ion battery with a charging current larger than 1C.

!

 Warning!

 Stop charging in case the Li-ion battery switches into alarm mode. (the protection 

relay will disengage)

!

 Caution!

 Charge before use

!

 Caution!

 Disconnect the charger from the Li-ion battery if it is not used for a long time.

!

 Caution!

 To preserve the lifespan of the Li-ion battery, use a charger approved by Super B. 

1. Connect the charger to the Li-ion battery as described in paragraph 4.6.
2. Charge the Li-ion battery in case of an under-voltage shutdown or if the state of charge 
drops below 20% to preserve the lifespan of the Li-ion battery.

5.2.1.  Charging rate

Super B Li-ion battery can be charged in approximately 1 hour. Displayed in Table 7 are the 
charge times for the Li-ion battery at different charge currents. Always use the indicated 
charge current and end of charge voltage during charging.

Содержание SB12V100E-ZC

















































Отзывы:

Нет отзывов