9
PARAMOTEUR EVO
Without twisting the risers, connect them to the harness attachment loops using the self-
locking carabiners.
Check for the risers to be properly positioned and untwisted. The «A» risers must be
located at the front and facing the flight direction (see diagram).
Lastly, check for the main self-locking carabiners to be fully closed and locked in place.
Connecting the wing to the harness.
Connecting the wing to the harness
Install the accelerator by following the instruc-
tions found on page 13.
Connect it to the wing using the split hooks.
Once the accelerator/speedbar is connected,
adjust its length according to your measure-
ments. For correct use, there must not be any
tension at the split-hook level when the accele-
rator/speedbar line is fully relaxed.
Installing the accelerator
Self-locking
Carabiners
Harness
Flight direction
Risers «A»
