background image

User manual 

| MINIMAX BUMP

SUPAIR

 | MINIMAX BUMP

 

| page 13

Care

Harness cleaning and maintenance.

It is a good idea to clean your harness from time to time. We recommend using a brush and soft solvents only ( soap or mild cleaning 

agents ).

Rinse thoroughly. Never use aggressive chemicals such as strong solvents which could be harmful to the fabric, webbings, stitching 

and weaken the overall integrity of the harness.

Life-span

The threads and fabric used to manufacture the MINIMAX BUMP were specifically selected for their quality and resilient capacities. 

However in particular instances such as long term UV exposure abrasion, contact with damaging chemicals,  general wear and tear, 

the harness will need to be inspected at a professional certified repair facility. Safety comes first!

The zippers should be lubricated from time to time  using a silicon spray.
If you regularly use your harness in a dusty environment ( dirt, sand , etc... )  we advise you to regularly check and maintain your cara-

biners and buckles : clean them with a mild detergent, then, blow-dry them fully but DO NOT LUBRICATE !

Prior to using them conduct a thorough carabiners and buckles checkup to insure their full functionality.

If you use your harness in a marine/sandy/salty environment, pay particular attention to your gear and follow a regular rigorous main-

tenance routine.

The self-locking carabiners are NEVER to be used for any activities other than paragliding.

Storage and transport.

When not in use your harness should be stored inside your paragliding backpack in a dry  cool and clean place  protected from UV ex-

posure. If your harness is wet  please dry it thoroughly before stowing it away.

Once every two (2) years a thorough harness inspection must be conducted :

•  Webbing wear and tear (no excessive wear nor rip beginning or unwanted folds).

•  Buckles and carabiners ( functionality  wear and tear ).

•  The BUMPAIR integrity (especially after a strong impact ), in other words, no holes, tears or rips.

During transport protect the harness against mechanical or UV deterioration (use a bag). Avoid long transports in wet conditions.

If your air bag is damaged, have it professionally checked and repaired if necessary.

Supair advice to replace the carabiners and spreader bars  every 5 years  or after 500 hours of use.

Содержание MINIMAX BUMP


















Отзывы: