Harness User’s manual
S
UP’AIR
_
ALTIR
ANDO
3
_Page
18
Installing the reserve parachute
Installing the reserve parachute in its container.
1.
- Place the reserve parachute inside
the container, with the handle positioned
upward, and parachute risers downward.
2.
- Take a small piece of line to help with the installation procedure.
- Push it through loop #1.
- Using a piece of cord, pull loop (1) through grommet (2) and then (3).
- Using another piece of cord, pull loop (4) through grommet (5).
3.
- Secure the installation by pushing the right side of
the yellow cable through the loop cord #1
- Secure the installation by pushing the left side of the
yellow cable through the loop cord #4
Carefully remove the line.
4.
- Fasten the reserve parachute handle to the Velcro®
- Push and secure the two ends of the reserve parachute
handle inside the Lycra® openings located beneath the
grommets.
Check the
completed
installation
during a
hang-test.
Have the installation checked by a
professional outfit.
Conduct an extraction test every
six ( 6 ) months to assure proper
system functionality.
Note : conducting and extraction
test does not imply deploying the
reserve parachute which will stay
inside its POD.
1
2
3
4
5
1
2
3
4
5
1
4
1
4
