Harness User’s manual
S
UP’AIR
_
ALTIR
ANDO
3
_Page
11
Accessories assembly
3. Speed-bar system
STANDARD double stage speed-bar/accelerator.
Compatible speed-bar/accelerator :
Ref. : ACCELSOUPLE
Speedbar assembly :
Regarding either side of the harness:
1.
Push the speed-bar/Accelerator line through the tube
located at the front side of the harness
2.
Push the speed-bar/Accelerator’s cord through the pul-
ley located on the lateral panel.
3.
Push the elasticated cord through the plastic “D” shaped
buckle and connect the plastic clip to the elasticated cord.
4.
Finally, attach a hook to the cord before connecting it to the
glider’s speed-bar/accelerator.
5.
Simulate the speed-bar/accelerator’s functionality by sliding the
cord back and forth.
2
1
3
4
2
1
3
4
There are two Velcros® to keep the speed-bar/accelerators
without elastic cord in place.
