SUP'AIR manufactures its products in Europe. Most of the components used are Made in Europe.
S
UP’AIR
_
A
CRO
3
Page 15
ACRO 3 manual
B
Risers to rescue connection.
1
2
3
Installing the reserve parachutes.
1.
1. Place the Maillon Rapide® (
locking gate toward the top, facing
outward ) and push it through the
bridle loop under the flap. Place
the O ring in the Maillon and twist it
in a figure 8 configuration.
2.
2. Push the riser through the
upper free "8" shaped toric
ring and connect it to the Mail-
lon Rapide®.
3.
3. Create a new twisted
loop with the O ring before
inserting it into the Maillon
Rapide®.
4.
4. Repeat procedures 1,2,3
with an additional O ring for
the connection to the harness.
Tighten the Maillon Rapide®
locking gate securely, with
pliers if necessarily.
5.
5. Tuck away the
risers excess under the
flaps.
Regarding the second reserve para-
chute : complete the installation of the
first rescue in its pocket. Repeat the
procedure with a new set of Maillons Rapides®,
by overlapping the second riser set on the initial
arrangement. Install first the reserve parachute
to which the handle is found opposed to your
predilection side.
