Sunways STH 3-8kW Series, Руководство пользователя

Страница: 29 / 37

56 57
Abbreviation Complete Name
Work Mode Current Work Mode / Work Mode Setting
Peakload Shifting Peakload Shifting Function Switch
SetMaxGrid kVA Set max allowed power from grid (under the condition of Peakload Shifting is on)
OnGrid SocProt. OnGrid Bettery Soc Protection
OnGrid DOD OnGrid Discharge of Depth
OffGrid SocProt. OffGrid Soc Protecttion
OffGrid DOD OffGrid Discharge of Depth
OffGrid Volt OffGrid Voltage Setting
OffGrid Freq OffGrid Frequency Setting
Discharg.S.time Discharge Start Time (Available in Economic Mode)
Discharg.E.time Discharge End Time (Available in Economic Mode)
Discharg.P.Lim. Discharge Power Limit (Available in Economic Mode)
Charg. S.time Charge Start Time (Available in Economic Mode)
Charg. E.time Charge End Time (Available in Economic Mode)
Charg. P.Lim. Charge Power Limit (Available in Economic Mode)
Unbalan. Output OnGrid 3-Phase Unbalanced Output Switch
On-Off Grid SW
Off-grid Function SW (Inverter will automatically switch to off-grid mode to ensure the
back-up side power supply when the gird is abnormal or off)
Relax OffGrid
Reduce the switching sensitivity of the On/Off-grid (applied to the places where the
grid is unstable or inverter always entered off-grid mode for some reasons)
OffGrid ReConn.
When the power grid is off, the inverter can automatically restart the back-up output
after a fault or overloading protection occurred if the Off-grid Restart is ON. Otherwise,
the back-up output needs to be restarted manually
FW Updating Firmware Updating
Inverter Display Abbreviation and Complete Name Reference Table
6 General Operation
Abbreviation Complete Name
E-Day Daily Energy Generation
E-Total Total Energy Generation
H-Total Total Generating Hours
System Info System Infomation
FW Version Firmware Version
SN Series Number
Fault Info Fault Information
RSSI Received Signal Strength Indicator
WiFi Reset WiFi Reset
WiFi Reld WiFi Reload, to reload the WiFi module to factory settings
Export Limit On-Grid Export Limit Function Switch
Feed in Grid Set the percentage of the power that is allowed to feed to the grid
Re-Conect Fault Reconnection Time
CT Ratio Current Transformer Ratio Setting
Modbus Addr Modbus Address Setting
Battery_ID Set Set Battery Model
System Maint.
System maintenance, includes inverter stop and run,
system restart
6 General Operation