Sunways STH-10K-HT Скачать руководство пользователя страница 3

4

5

1.Preface

1.1 Overview

This manual is an integral part of Sunways STH 4-12kW series three-phase high-voltage 
hybrid inverters (hereinafter referred to as the hybrid inverters). It mainly introduces the 
assembly, installation, electrical connection, debugging, maintenance and troubleshooting of 
the products. Before installing and using hybrid inverters, please read this manual carefully, 
understand the safety information and be familiar with the functions and characteristics of 
hybrid inverters.

1.2 Target Groups

This manual is applicable to the electrical installers with professional qualifications and 
the people who bought it. If there are any problems in the installation process,  please call 
Sunways service telephone at +86 400-9922-958 or email Sunways at service@sunways-tech.
com for consultation.

2.Safety Instructions

2.1 Safety Notes

2.1.1 Before installation, you should read this manual carefully and follow the instructions in 
this manual strictly. 
2.1.2 Installation operators need to undergo professional training or obtain electrical related 
professional qualification certificates. 
2.1.3 During the installation, do not touch any parts of the inner part of the inverter except the
terminals. 
2.1.4 All electrical installations must conform to local electrical safety standards. 
2.1.5 If the inverter needs maintenance, please contact the local designated personnel for 
system installation and maintenance. 
2.1.6 To use this grid-connected inverter for power generation needs the permission of the 
local power supply authority. 
2.1.7 During the operation of the inverter, the surface temperature may be higher and there is 
a risk of burns. Do not touch. 
2.1.8 When installing photovoltaic panels in the daytime, the photovoltaic panels should be 
covered with opaque materials to avoid the risks and danger of high voltage at the panel end 
in sunlight.
2.1.9 When wiring the lithium battery terminals, please disconnect the breaker or switch of the 
lithium battery in case of a physical injury caused by the high-voltage.

  

Attention

The products, services or features you purchase are subject to the commercial 
contracts and terms of Ningbo Sunways technologies Co., Ltd. All or part of the 
products, services or features described in this document may not be within your 
purchasing or using scope. Unless otherwise agreed in the contract, the Company 
shall not make any express or implied declaration or guarantee of the contents of this 
document.

Due to product version upgrades or other reasons, the contents of this document will 
be updated periodically. Unless otherwise agreed, this document serves only as a 
guide to use, and all statements, information and recommendations in this document 
do not constitute any express or implied guarantee.

Manufacturer:

 

Ningbo Sunways technologies Co., Ltd.

Address: 

No. 1, Second Road, Green Industrial Zone, Chongshou Town, 

                   Cixi City, ZheJiang Province, PEOPLE’S REPUBLIC OF CHINA

Website: 

www.sunways-tech.com

Service Mail: 

[email protected]

Hotline: 

+86 400-9922-958

Содержание STH-10K-HT

























Отзывы: