Sunwave CrossFire HP, Руководство пользователя

Страница: 88 / 92

CrossFire HP – All-Digital Transport System
User Guide
© SUNWAVE COMMUNICATIONS LIMITED 2015 88 Revision 05
10.
10. 10.
10. Application
Application Application
Application Scenarios
Scenarios Scenarios
Scenarios
This section describes various configuration scenarios for the CrossFire.
10.1. 10.1. 10.1. 10.1. Operators Operators Operators Operators Located Located Located Located at at at at Same Same Same Same Site Site Site Site
In this example, operators A, B, C, D and E are located at the same site (see Figure 10- 1). Operators B and C operate
in the same frequency band, which can be combined in one channel in “the RF domain”. The maximum bandwidth per
operating band should be less than 60MHz and the maximum bandwidth of all operators should be less than 200 MHz.
Operator E
O perator A
Fib er Fib er Fib er Fib er
A U
E U
Fib er
Fib er Fib er
Fib er
P OI
A A A A
B B B B++++C C C C
D
D D
D
EEEE
R U 1
P OI
A A A A
B B B B++++C C C C
D D D D
EEEE
R U 8
O perator D
O perator B
O perator C
Fib er Fib er Fib er Fib er
Figure Figure Figure Figure 10 10 10 10---- 1 111 Example Example Example Example for for for for Operators Operators Operators Operators Located Located Located Located at at at at Same Same Same Same Site Site Site Site
10.2. 10.2. 10.2. 10.2. Operators Operators Operators Operators Located Located Located Located at at at at Separate Separate Separate Separate Sites Sites Sites Sites
In this example, operators A, B, D and E are located at one site and operators C and F are located at a different site.
(See Figure 10- 2) Operators C and F can access the Master AU through the Slave AU so that all operators can combine
within the same fibre from the Master AU to the EU. In contrast with the scenario in section 11.1, operators B and C can
be combined in the “baseband domain”. The maximum bandwidth per operating band should be less than 60MHz and
the maximum bandwidth of all operators should be less than 200 MHz.