Portable Automatic Satellite TV Antenna
VQ2100
Quick Reference Guide
11200 Hampshire Avenue South, Bloomington, MN 55438
PH 952.922.6889 || FAX 952.922.8424 || kingcontrols.com
Thank you for choosing a KING Antenna!
In this Quick Reference Guide you will fi nd all the information
you need to set up the KING Flex and start watching TV!
Watch TV in just 2 simple steps!
STEP 1
SETUP
IMPORTANT! DISH CUSTOMERS WITH HD SOLO RECEIVERS ONLY!
If you have a DISH model ViP211z, ViP211k, ViP211 or 411 single tuner HD
receiver, you can use the simplifi ed DISH Tailgater
®
user interface on your
receiver. DO NOT USE THIS GUIDE. See your Owner’s Manual.
If you move the antenna, you will have to re-acquire the satellites by repeating
the scan process.
The KING Flex will go into “sleep mode” after 15 minutes and the
COAX
CONNECTION
light will dim. Press
POWER
to wake unit up if necessary,
i. e. the unit is in sleep mode, you move the antenna, and wish to rescan for
satellites.
The KING Flex must be on to watch TV.
To turn the unit off at any time, press
POWER
for 3 seconds.
STEP 2
OPERATION
Make sure TV and satellite receiver are on.
Press
POWER
to turn on KING Flex Controller.
• Wait until the lights stop fl ashing and only
the
COAX CONNECTION
light stays on.
Press and
hold
SCAN
for
3 seconds
.
• The controller lights fl ash while the
antenna scans.
• When the lights stop fl ashing,
the program guide will download.
• When downloaded, select your desired channel.
Enjoy!
More detailed information on operation, second receiver use,
troubleshooting, accessories, the warranty, and the security and alarm
features can be found in your Owner’s Manual.
Bell TV is an offi cial trademark of Bell Canada.
DIRECTV is a registered trademark of DIRECTV, Inc.
DISH and Tailgater are registered trademarks of DISH Network L.L.C.
FLEX is a registered trademark of Electronic Controlled Systems, Inc.
KING and King Flex are trademarks of Electronic Controlled Systems, Inc.
21440 Rev E
A
A
B
B
C
C
D
IMPORTANT! Tall objects can block signal.
FIRST TIME USERS!
After making connections below, you will have to perform the KING Flex
and Receiver Confi guration on the back of this guide before going to STEP 2.
IMPORTANT! Make connections in the order shown.
For Sales Information Please Contact
RoadTrucker Inc (www.RoadTrucker.com)
8312 Sidbury Rd.; Wilmington, NC 28411
(800) 507-0482 / (910) 686-4281