MID POWER
4 x 37dBm Output
5G NR Compliant
© Sunwave CG_CF_M2 v2.1.0 | 35 of 47
Contact us today:
www.sunwave.com
[email protected]
Advanced Activities
Mapping Configuration
The CrossFire M2 system can comprise many M2 to achieve extensive area coverage. CrossFire maintains the mapping
mechanism between the A2 and M2, so all M2 units in the system can transmit the signal as long as M2 is correctly
mapped to A2. Generally, the original mapping order is set automatically via the module sequence as the physical device
assembly (A2_1 -> A2_2 -> A2_3 -> A2_4).
Note:
If A2 modules do not have configured band properties(invalid), modules are not able to be mapped.
If there are two same band modules (Module 3 and Module 4) on an M2 and two corresponding band modules (Module
1 and Module 2) in A2, the mapping information is M2-Module3 to A2-Module1 and M2-Module4 to A2-Module2.
If there are two same band modules (Module 3 and Module 4) on an M2 but only one corresponding band module
(Module 2) in A2, the mapping information is M2-Module3 to A2-Module2 and M2-Module4 to null.
To check the mapping information:
1.
Jump to M2 OMT
2.
Go to
Settings -> Band Configuration -> Module Mapping
Figure 42.
Mapping Information
