SUNVILLA Bellafina, Инструкция по сборке / Уход и использование

Страница: 4 / 13

Step 1:
Step 3:
Page 4 of 13
Line up the bolt holes on the fire pit table top (A) with the
corresponding bolt holes on the fire pit table base (B).
Screw the M6*22 bolts (AA) with flat washers (BB)
using the wrench (CC). Now tighten all the bolts as shown.
Spread the decorative glass (F) out evenly over the burner area.
Use all the glass provided for best effect. Keep the glass
clear of igniter spark to avoid accidental blockage.
A percentage of glass beads may arrive split in half.
This is normal. Additional beads may split after use.
DO NOT BURN WITHOUT GLASS
BEADS OR OTHER SUBSTRATE
SUCH AS LAVA ROCK IN BURNER.
Step 2:
ASSEMBLE ON A FLAT SOFT
SURFACE SO YOU DON’T SCRATCH
OR DAMAGE THE TABLE TOP.
Before using the fire pit table, install the battery (DD).
Open the plastic cover, put in the battery (DD) and enclose the cover as shown.