Phono
-
Remove the stylus protector.
-
Be sure that the tone arm is being detached from the tone arm rest before operating
and re-secured again afterwards.
1.
Set the function switch (12) to Phono mode.
2.
Set the speed selector to the proper position depending on the record to be played.
3.
Place the record on the platter (use the adaptor of 45 rpm if required).
4.
Lift the tone arm from the rest and slowly move it to the record side. The platter will start to rotate.
5.
Place the tone arm to the desired position of the record.
6.
Adjust the volume to the desired level.
7.
At the end of record, the vynil will automatically stop rotating. Lift the tone arm from the record
and return it to the rest.
8.
To stop manually, lift the tone arm from the record and return it to the support arm.
Note
:The Phono and Aux are in the same channel of this unit, once the Aux in jack (20) is plugged by any 3.5mm stereo plug,
the Phono function will change to
Aux
automatically and the
Vynil
will stop. Ensure that not have in the Aux in (20) nothing
connected before use the Phono function.
Aux-in Input
You can connect audio device, e.g. MP3 player, iPod etc. to this system via a cord with 3.5mm stereo jack plugs (not
supplied). Connect one end of this cord to the headphone jack of the external device and the other end to the Aux-in jack (20)
at the front of the unit. Select “ Phono/Aux ” from Function switch (12), then start to playback your external device to enjoy
your music.
Line out connection
You can connect the unit to your hi-fi system by connecting the RCA output socket (28) to the auxiliary in your hi-fi
socket with a RCA cable (not included).
Note : THIS UNIT WILL SWITCH TO STANDBY MODE AUTOMATICALLY ONCE NO ANY MUSIC PLAYING
OVER 15 MINUTES.
Remote control functions
Battery installation
(battery not provided)
The infra-red transmitter requires 2 pc AAA size battery for operation
Button description
1) Skip/search forward
Press once to skip to next track, press & hold for
search forward
2) Skip/search backward
Press once to skip to previous track. Press & hold for
search backward
3) Folder up
/down
In MP3 mode, press to select folder up or down.
4) Rep/Ran
In CD/USB mode, press to active repeat / random function
5) Track separation
Press to divide the recording track at turntable one by one
during encoding
6) USB/SD
In USB/SD mode, press to select USB or SD function
repeatedly
7) Play/pause
In CD/USB mode, press once to start playback. Press again to enter pause mode.
8) Stop
In CD/USB mode, press to stop playback or cancel the stored program.
9) Rec In CD/USB/Phono mode, press to active/stop recording.
10) Delete In USB/SD playback mode, delete the current track.
EN-8