Error Messages
Msg.
Icon
Description
Er00
“PUMP ON” flashing
Problem with pump or pump tube is kinked.
Er01
N/A
Check coil temperature sensor at the side of
coil and its sensor cable.
Er02
N/A
Check ambient temperature sensor in the front
of the coil and its senor cable.
Er03
N/A
Check humidistat sensor in the front of the coil.
Er04
N/A
Ambient temperature is too high.
Note: Contact your local distributor for service.
On/Off Indication Light:
Color
Status
Description
N/A
Off
Machine has been turned off.
Red
On
Machine has been turned on.
Green
On
Machine start dehumidification.
WiFi Indication Light:
Color
Status
Description
Red
Flash, 2 times per Sec.
EZ mode WiFi connection
Red
Flash, 1 time per Sec.
AP mode WiFi connection
Red
On
EZ/AP WiFi Connection Failure
Green
Flash, 1 time per Sec.
Connecting WiFi network.
Green
On
WiFi Connection successful.
Green
Flash, 2 times per Sec.
WiFi Connection Failure/ WiFi pcb is
disconnected.
Maintenance
WARNING!
Always unplug any dehumidifier before performing maintenance
procedures.
Before Each Use
l
Inspect the electrical cord for damage.
LCD Display – Cont.
“TOTAL” CLOCK.
While “TOTAL”
CLOCK time is chosen, “TOTAL” wording
in the square box will flash for 3 sec. The
4 digits show how many
DAYS
the
machine has been used.
“JOB” CLOCK
.
While “JOB” CLOCK
time is chosen, “JOB” wording in the
square box will flash for 3 sec. The four
digits display how many
HOURS and
MINUTES
either the CURRENT JOB is
running or the LAST JOB has been run.
“
o
F” TEMPERTURE.
While “
o
F”
TEMPERTURE function has been
chosen, “
o
F” wording in the square box
will flash for 3 sec and 3 digits figures
display the current
ambient “
o
F”
temperature.
“
o
C” TEMPERTURE.
While “
o
C”
TEMPERTURE function has been
chosen, “
o
C” wording in the square box
will flash for 3 sec and 2 digits figures
display the current ambient “
o
C”
temperature.
