SUNTEC KLIMATRONIC HEAT SAFE 1500, Инструкция по эксплуатации

Страница: 10 / 83

Assembly
1. Remove the heater and all the accessories from the carton.
2. Turn the heater upside down.
3. Position the wheel base assemblies between the end fins.
4. Attach them to the heater using the U-bolts and wing nuts.
5. Tighten the wing nuts.
6. Turn the heater the right way up.
Part description
1. Power setting switch
2. Thermostat control
3. Handle
4. Oil filled fins
5. Hour timer switch (only HEAT SAFE 1510, 1550, 2010 and 2050)
6. Turbo (only HEAT SAFE 1520, 1550, 2020 and 2050)
7. Turbo switch (only HEAT SAFE 1520, 1550, 2020 and 2050)
8. Castors
9. Cord storage
Operating your KLIMATRONIC HEAT SAFE Oil-Radiator
Place the heater on the floor at least 90 cm away from the wall and any other objects such as furniture,
curtains or plants. (Make sure the power supply use corresponds to the one on the rating label) With
the thermostat control switch and the power setting switches in the “OFF” position; Plug the heater into
the main power supply.
Using the Thermostat and power switches
1. Room temperature can be adjusted using the thermostat. Simply turn the thermostat knob
clockwise, to increase the heat, and anti-clockwise to decrease the temperature, until you reach the
desired temperature.
2
.
The heating to one of the following power settings change.
a) Switch one (I) for press
600W (1500 series)
850W (2000 series)
b) Switch two (II) press for
900W (1500 series)
1250W (2000 series)
3. Switch one (I) and two (II) simultaneously for
1500W (1500 series)
2000W (2000 series)
4. When the power switch is on, the light is.
Note: SAFE HEAT climate is filled with oil and slowly cools down after switching off the electrical
supply. Let the appliance cool down before moving; for easy transport should use the standard grip.