Operation
•
Power supply: 220-240V ~, 50Hz, 2000W
•
Please remove the rear cover and remove the water tank.
•
Please unscrew the water tank cap, fill the tank with water, place the screw nut and tighten it.
•
Place put first the water tank and then the cover back in.
•
Please connect the unit to the power supply and press the main switch: A warm-up signal sounds, as the
on / off symbol lights up on the control panel, the unit is in standby mode.
Humidifying function:
•
Please press the humidification function switch upwards, the green indicator light
will light up.
•
You can adjust the humidification level using the rotary switch by turning it up
(raise) or down (decrease).
•
As soon as the water tank is empty, the humidification function switches off
automatically, the indicator light lights up red. After the water tank has been filled,
the indicator light again lights up green.
•
The humidification function can be used independently of the heating function or
together with it.
•
We recommend filling the tank with distilled water to avoid limescale deposits.
Heating function:
•
Press the on / off button on the control panel.
•
Press the button
to select between the three heating modes (Low, High and Eco).
•
You can manually set the desired temperature in the "low" and "high" modes by pressing the
button
twice. The "°C" symbol lights up, the temperature indicator flashes. Now you can set the required
temperature between 5 °C and 35 °C using the "+" and "-" buttons. Please press this button again to
save the settings and return to the working mode.
•
Eco mode: In this mode, the room temperature of 22 ° C remains constant. If the room temperature falls
below 18 ° C, the unit automatically jumps to the high heating stage. When 18 ° C is reached in the
room, the unit continues to operate in low heating mode. As soon as 22 ° C is reached, the device
switches off automatically, the display shows the symbol "ECO".
•
Oscillation: Press the button
to turn the oscillation function on or off. The corresponding symol is
displayed on the display. This function can only be activated in heating mode.
•
Timer: Please press the button
once. The "h" symbol lights up, the hour display flashes. Now you
can set the desired off-time between 1h and 12h with the "+" and "-" buttons. Please press the button
again to set the desired room temperature. Please press this button again to save the settings and
return to the working mode.
The display now shows alternately the room temperature and the set time.
All the functions described above can be controlled by the remote control.
Control panel / remote control:
On/Off
Heating modes (low, high, eco)
Temperature / time setting
Increase temperature / time setting
Decrease temperature / time setting
Oscillation
Display symbols:
On/Off
Low heating level
High heating level
Eco mode
Oscillation
Ambient temperature
Timer setting
Indicator light
Rotary switch
