LEC
®
315 REMOTE SYSTEM SETUP:
1. Remove the system from the box along with all additional parts.
2.
Carefully remove the protective film from the inner reflector.
3. These systems do not require much setup.
4. Carefully insert the proper lamp into the socket making sure you line up the pins correctly
then gently twist until the lamp locks in.
Please refer to lamping installation instructions.
5. Hang the reflector portion of the unit using 2 of the 4 included V-hangers
(Fig. 2)
.
6. Follow one options below for hanging the ballast:
(Do not power unit on).
Option 1:
Hang unit using Kendorf unistrut brackets
(Fig. 2)
Option 2:
Hang unit using the V-hangers
(Fig. 3)
Option 3:
Wall mount brackets
(Fig. 4)
7. Attach the lamp cord from the remote ballast to the male plug coming off the reflector.
8. Plug the unit into the proper NEMA configured receptacle or hardwire unit depending
on model voltage.
TROUBLESHOOTING… IF YOUR FIXTURE DOES NOT WORK:
1. CHECK YOUR ELECTRICAL SOURCE: Make sure the unit is plugged in properly
and that the breaker is not tripped or fuse blown.
2. CHECK THE LAMP: Make sure the lamp is fully seated (screwed) in the socket.
WARRANTY SERVICE: Please read warranty information first
If after troubleshooting problems the light will still not work, you should return the light to the dealer where you purchased it. They will be able to further evaluate the light and test
its various components and quite possibly will be able to identify and/or fix any problems. Often the problem is as simple as a defective lamp. If the dealer is unable to fix the light,
they will return it to us for factory repair. Many dealers have loaner fixtures that you may check out until yours is returned (usually not more than 7-10 days).
To locate the dealer nearest you, visit our website at www.sunlightsupply.com and complete the “Dealer Search”. If there are no dealers in your area, you may contact us directly for
technical support. If we cannot help you resolve the problem over the phone, we will issue you a RMA # (return merchandise authorization) authorizing you to return the system to us for
factory reconditioning (if the unit is under warranty). You will need to provide an email address or fax number so that the Authorization Form may be sent to you. You will need to include this
Authorization Form in the packaging when returning your Sun System
®
unit. Also please write the # on the outside of the box.
Please package the light carefully in its original packaging. If it is damaged in shipment we will not be responsible.
Once we receive the light back, we will repair it within 48 hours (business) and return it to you via UPS Ground. If the unit cannot be repaired, a replacement will be sent. If there are no
replacements available, a comparable unit will be sent back.
IMPORTANT:
PROOF OF PURCHASE REQUIRED FOR RETURNS
SUN SYSTEM
®
LEC
®
315 REMOTE = 2 Year Warranty
Returning Units: Please contact your retail store for returns.
WARRANTY INFORMATION:
Sunlight Supply
®
, Inc. warrants to the original purchaser of this product against defects in material and workmanship under normal use for 2 years on Sun System
®
LEC
®
315
Remote. During the warranty period, Sunlight Supply
®
, Inc. will, at our option, and without charge, repair or replace this product if the unit or any of its components fail or
malfunction.
This warranty is expressly in lieu of all other warranties, expressed or implied, including the warranties of merchantability and fitness for use and of all other obligations or liabilities
on the part of the seller. This warranty shall not apply to this product or any part thereof which has been damaged by accident, abuse, misuse, modification, negligence, alteration or
misapplication. Sunlight Supply
®
, Inc. makes no warranty whatsoever in respect to accessories or parts not supplied by Sunlight Supply
®
, Inc. This warranty shall apply only to the
United States, including Alaska, Hawaii and territories of the United States.
NOTE:
Sunlight Supply
®
, Inc. is a manufacturer of supplementary lighting systems. All sales offerings to the public are done through a nationwide group of dealers.
No sales offerings will be made directly to the general public.
www.sunlightsupply.com
05/27/2015
Fig. 4
Fig. 2
Fig. 3
Fig. 3
Fig. 2
Kendorf Unistrut
Brackets Option
V-hangers Option
