© by WilTec Wildanger Technik GmbH
Item 55557
–55560
Page 6
06 2021
-1
Assembly and maintenance
Switch off the power when you will clean the inner parts of the device or replace the UVC lamp. Consider
the above parts list.
Assembly
After having assembled the parts of the fountain in accordance to the exploded view, adjust the exten-
sion tube to the appropriate height and immerge the device into the water. If the pump is intended to
pump clean water, you can remove the fountain construction and connect the water outlet conduct.
Maintenance
Filter sponge and material:
1. Remove the parts of the fountain and open the clamps on both sides of the filter cover; then you
can open the filter cover.
2. Remove the filter sponge and material(s), clean them or replace them (it is advisable to clean
the filter sponge weekly).
UVC lamp:
1. Open the pump and remove the UVC lamp. Open the safety lock and turn the lamp head coun-
ter-clockwise to remove the quartz crystal glass tube construction. Now you can replace de UVC
lamp (with CUF-2800 series, the pump does not need to be opened, simply turn the lamp head
counter-clockwise to remove).
2. If you should want to clean the quartz crystal glass tube, remove the fastening nut and take out
the tube for cleaning.
Water pump:
1. Turn the rotor cover counter-clockwise until it snaps, open it outward to separate the rotor cover
from the pump housing.
2. Remove the rotor and clean all parts with the small brush.
Winter storage
1. Take out the device of the water.
2. Thoroughly clean the device.
3. Check all parts and the condition of the device.
4. Keep the device safe from frost and inside a container filled with clean water.
Highly fragile parts
1. UVC lamp
2. Filter material (bioballs, gravel, filter sponge).
