© by WilTec Wildanger Technik GmbH
Seite 27
http://www.wiltec.de
http://www.aoyue.eu
http://www.teichtip.de
Version 6. 2017
Warranty Information
Not covered by warranty:
•
Damaging the mechanical seal due to dry running or pumping cleaning agents or other chemical
substances.
•
Damages in transit
•
Damages caused by unauthorised interference
•
Parts subjects to wear (propeller, sealing flange) do not fall under warranty.
Hints for maintenance!
The pond motor pump is a maintenance-free and a practice-proven quality product that was sub-
jected to rigorous final inspections. For a long working life and continuous operation we recom-
mend regular checking and proper care.
Maintenance and Cleaning
Overload protection:
The pump has an integrated overheat protection. After the pump is stopped it has to cool down for
a while due to the overheat control device, before it runs again. In case it does not run again by
itself, the following checks shall be conducted:
Could the pump cool down sufficiently due to the overheat protection after being stopped?
Is the water supply sufficient? >
Improve the water supply!
Is the filter clogged? >
If necessary rinse the filter!
Is there dirt in the pump housing?
>
Perform cleaning!
Is the hose or the pipe clogged? >
Clear the hose/pipe!
Is the hose broken, too long? >
Check, replace, shorten!
Technical specifications
:
Modell
SunSun CQB
2000/2500
Abmessungen(mm)
175 x 105 x 100
Motor
Synchron
Eingangsspannung
230VAC ~50Hz
Leistungsaufnahme
45 Watt
Maximale Förderhöhe
2,4 m
Max. Fördermenge in l/h 2700
Modell
SunSun CQB-2003
/ CQB 2503
Dimensions(mm)
193 x 99 x 99
Motor
Synchron
Eingangsspannung
230VAC ~50Hz
Leistungsaufnahme
35 Watt
Maximale Förderhöhe
2 m
Max. Fördermenge in l/h
2300
Schlauchanschluss Ø / Zoll
19 mm (3/4“) 25mm (1“)