Introduction
Thank you for purchasing this quality product.
To minimize the risk of injury we urge that our cli-
ents take some basic safety precautions when using this device. Please read the operation in-
structions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Safety regulations
CAUTION:
On standing water bodies, garden ponds, swimming ponds as well as in their surrounding
areas, you have to use the device only with a residual current circuit breaker with a triggering
nominal current up to 30 mA (according to VDE 0100 part 702 and 738).
The device is not suitable for the use in swimming pools, in any kind of paddle pools or any
other water bodies during the operation of which there are humans or animals in the water.
Commissioning the device during the stay of humans or animals in the danger zone is not al-
lowed. Ask your electrician!
This device must not be used by persons (including children) with reduced physical, sensory
or mental capabilities, or with a lack of experience and/or knowledge, unless they are super-
vised by a person responsible for their safety or have been given instructions concerning the
use of the device.
Children should be supervised to ensure that they do not play with the device.
ATTENTION:
Perform a visual inspection of the device before each use. Do not use the device if the safety
equipment is damaged or worn. Never put the safety equipment out of force.
Only use the device for the purpose as specified in this manual.
You are responsible for the safety in the work area.
If the power cord or the plug is damaged by external influences, the cord must not be repaired!
Since the cord is moulded with the stator, a replacement is not possible, the pump must be
scrapped.
The specified unit voltage of 230 V AC as indicated on the nameplate has to match the exist-
ing mains voltage.
Never lift, transport or attach the device by the power cord.
Make sure that the electrical connectors are located in a flood-safe area and that they are pro-
tected against moisture.
Pull the power plug before working on the device.
The operator is responsible for the compliance with the local safety and installation regula-
tions.
The user has to exclude, by taking the appropriate measures (e. g. installation of an alarm
system, reserve pump, etc.), any consequential damage due to flooding of areas and faults in
the device.
If there is a failure of the device, the repairing is only to be done by a professional electrician.
The device must never run dry or be operated with fully closed suction pipe. For the damage
in the device caused by a dry run the manufacturer’s warranty will be void.
The device must not be used for the operation in swimming pools.
The device must not be installed in the portable water circulation.
© by WilTec Wildanger Technik GmbH
Item 50325–50327
Page 3
http://www.WilTec.de
http://www.aoyue.eu
01 2021
-1