SUNSTONE Ruby Companion Pro, Инструкция по эксплуатации, Страница: 7 / 20

LIVE CIRCUIT
: Use only with a Ground-Fault Circuit Interrupter - GFCI protected Outlet
with this Grill.
VOLTAGE
: Use only extension cords approved for outdoor use marked with W-A
Certifications and rated for the power of this appliance.
GRILL INSTALLATION – STEP BY STEP GUIDE
1. Mount Transformer
Using metal screws and attach the
transformer to the back inner wall of
your island’s cabinet wall, somewhere
near the already installed GFCI electrical
outlet. When you plug the transformer
in, double check then GFCI breaker
switch, that the outlet has power.
2. Elect. Connection
Locate the Light Button on Left side of
grill control panel. The Transformer's
electrical connection to grill is located
behind control panel, next to light
button. The connection clips together to
form a secure connection. Double check
that all wires are tightly pushed into plug
sockets, so all wires make proper
connections. You can tuck wire into body
of grill or island frame.
PAGE 3
3. Gas Line Connection
See the BACK-RIGHT UNDER-SIDE – This
is where the Gas Line will connect to the
Grill. Grill is shipped as either LP or NG
gas type. Recommendation to have an
18” hose to allow grill to be pulled out if
necessary. For LP & NG Gas Installation,
see pages 11 to 13 for complete
instructions, or call 888-934-9449 for
additional assistance.