Sunstech TLEI19, Инструкция по эксплуатации

Страница: 7 / 24

Introduction
Rear View
Wall Mounting
The TV is provided with mounting holes for a VESA approved wall mounting bracket(NOT
SUPPLIED). Remove the Posi screws holding the base to the base bracket and lift the
base away (do not remove the base mounting bracket). Mount the VESA bracket using
4 x M4 x 8 Iso metric threaded screws (not supplied). Do not use screws longer than 8 mm,
damage will occur to the internal parts. Fit the wall bracket securely following the manufacturers
instructions.
6
USB
Common interface: CI SLOT
RF: Connect antenna or cable 75 Ohm coaxial to receive TV signal.
R/L in: Connect them to the audio output terminal of DVD.(shared with YPbPr)
VIDEO: Connect it to video output terminal of DVD.
YPbPr: Connect them to the YPbPr video output terminal of DVD.(used in
component source)
SCART
POWER: Connect to the power supply.
USB USB for upgrade,media and PVR.
HDMI: Connect it to the HDMI of DVD or other equipment.
VGA: For PC display.Connect it to the D-Sub 15 pins analog output connector of the PC.
PC-IN: Connect it to the audio output terminal of PC.
SCART: Connect them to the SCART video output terminal of DVD.(used in component source)
Headphone : Connect it to your headphone or other audio equipment.