89
EMBROIDERY DESIGN EDITING
This function is used to edit selected designs. When the operating system loads, press
The sub-menu contains:
■
STITCH EDIT
LESSON: Edit the design in Location #5 as follows:
Check the STITCH 500 data and set the X and Y data at (0).
Set the STITCH 700 data with the correct color changing code.
Delete the STITCH 800 data and insert X-0,Y-0.
Enter JUMP in the STITCH 900.
STITCH EDIT: This allows editing of the stitch data of the selected design.
DESIGN DIVIDE: This function is used to divide the selected design into two parts.
DESIGN FILTERING: This function edits the stitch length and removes short stitches.
Place the cursor at 1, STITCH
EDIT and press to edit
stitches.
Use the UP and DOWN keys to get
to stitch 500. This screen appears.
1] 0 0 J
2] 0 0 J
DEL INS EDIT
In the first line 1] is the stitch number, next is the
X data, the next is the Y data, and “J” means
JUMP CODE.
General code : “N”
Trimming code and needle bar change code : “CC”
Ending code : “ED”
500] 3 -33 N
501] 3 -32 N
DEL INS EDIT
The data of stitch 500 is as shown.
X Data : 3
Y Data : –32
Function code : General code
To correct stitch 500 data press
Call from Location #5 and press
1. STITCH EDIT
2. DESIGN DIVIDE
3. DESIGN FILTERING
