SunStar SPS/E-BR1202 Series, Руководство пользователя, Страница: 29 / 38

30
6.13.2) How to set up Y-axis Origin
1) Separate a bed cover (right).
2) Move the center of work clamp foot to be placed on the center of Y-axis.
3) As seen in the figure, unfasten the bolts of Y-sensor plate and let the end of Y-sensor plate locate on the center of
sensor, then fasten the bolts with screw-driver.
6.14) How to adjust the feeding plate
1) Select Pattern No.
“
0
”
at the operation box.
2) Press [Ready] key to ascend the button clamp that the
machine can return to the origin.
3) Align the center of the feed plate ① with the center of the
needle plate cover
②
by adjusting the feed plate
①
.
6.15) Checking the setting position of button
clamp
1) Select Pattern No. “ 0 ” at the operation box.
2) Press [Ready] key to ascend the button clamp that the
machine can return to the origin.
3) Insert the button into the button clamp
①
.
4) Press the button clam of Step 1 to descend its holder. At
this time, turn the pulley for the error message [
“
Er 03
”
]
to display on the LCD.
5) If the needle point does not insert into the button
’
s
center, loosen the fixed screw
②
of the button clamp
bracket, and fix it that the needle point can be inserted
into the button
’
s center.
6) After adjusting, check the pattern form that the needle is
exactly inserted into the button hole.
Tightening
Screw
Y-Sensor
Y-Sensor Bracket
Y-Sensor Plate
②
①
Needle point conform
Button
①
②