Form
#43127350
-8-
July 09
CLEANING
The blower wheel will collect lint and could require cleaning once a year. If the air output
decreases, or the noise level increases, it indicates a dirty wheel. Clean the blower wheel
with a vacuum cleaner or apply high-pressure air to the blower wheel.
NOTE !
Unplugging of blower accessory will not stop the heater from cycling. To shut the
heater off, turn the control knob to "OFF".
WIRING
WARNING
Electrical Grounding Instructions
This appliance is equipped with a three-prong (grounding) plug for your protection against
shock hazard and should be plugged directly into a properly grounded three-prong
receptacle.
The appliance, when installed, must be electrically grounded in accordance with local
codes, or in the absence of local codes, with the National Electrical Code ANSI/NFPA #70-
latest edition.
DO NOT cut or remove the grounding prong from this plug.
For an ungrounded
receptacle, an adapter (which has two prongs and a wire for grounding) can be purchased,
plugged into the ungrounded receptacle and its wire connected to the receptacle mounting
screws. With this wire completing the ground, the appliance cord can be plugged into the
adapter and be electrically grounded.
SUNSTAR HEATING PRODUCTS, INC.
Post Office Box 36271
(28236)
306 West Tremont Avenue
(28203
)
Charlotte, North Carolina
Phone (704) 372-3486
Fax (704) 332-5843
Toll Free (888) 778-6782
www.sunstarheaters.com
email:
