SunStar Multi Head, Руководство пользователя

Страница: 91 / 105

88 89
6.6
Speed Code (S-Code)
This function is to change the embroidery speed from high speed to low speed for a particular part of
embroidery operation. When conducting embroidery of the same design from the beginning, the speed
change will occur at the embroidery part where the speed change was previously set.
Low speed can be set in ‘(6) Low Speed’ under the ‘5.3.3 M/C Parameter’ menu.
If you press button that appears when stopped during the embroidery, you will see the
screen as the <Fig. 6.6-1>.
(1)
High Speed
This function is to make it high speed when you want to work with high speed during the embroidery
with low speed. While working with low speed, stop and select “High Speed.” Press “Start” to change
to high speed.
(2)
Low Speed
This function is to make it low speed when you want to work with low speed during the embroidery
with high speed. While working with high speed, stop and select “Low Speed.” Press “Start” to change
to low speed.
(3)
Speed Initialization
This function is to initialize the speeds set for particular sections to default speed.
<Fig.6.6-1>