9
2
Installation
1) Installation of machine head
※
Insert hinge rubber
①
into the table. As described in
“
Figure 1
”
, put the oil pan corner in the middle of the head
supporting rubber
②
and attach the table. After putting the hinge
③
in the bed hole, insert the hinge rubber
①
and install
the sewing machine in the table corner rubber cushion.
[Figure 1]
2) Installation of power switch box
When attaching the power switch box
①
, as shown in “Figure 2”,
attach it to lower right corner of the table.
①
[Figure 2]
Warning
▶
In case of installing the machine, it should be performed by the trained engineer.
▶
In case of wiring work, be sure to leave the work to an expert or an agent.
▶
The machine weight over 42kg. At least 2 persons should carry out the installing work.
▶
Plug in after finishing the installing work. In case the user press on the step by mistake, the
machine runs automatically. By doing so, it can cause the physical injuries.
▶
Connect the earthed lines.
Imperfection of the connection of the earthed lines gives rise to an electric shock or malfunction.
▶
Set the belt cover on top of the machine.
▶
In case of bending the machine backward or returning to the original condition, be sure to use
both hands. If you use only one hand, it causes physical injuries by slipping.
①
②
③
④
