Packaging Contents
ITEMS REQUIRED
IMPORTANT SAFETY INSTRUCTIONS
When using product,basic precautions should always be
followed,inchuding the following:
●Heed all warnings,including below warnings AND those
included on product.
●Disk Light (fixtures) and retrofits are designed to meet
the lates NEC requirements and are ETL/cETL listed in full
compliance with UL 1598.
Before attempting installation of any recessed housing
check your local electrical code.
This code sets the wiring standards for your locality and
should be carefully studied before starting.
(Purchase separately)
●#2 Screwdriver
B.(2)#8-32 x 1-3/8 in.
junction box screws(use the size that
fits your junction box)
(2)#8-32 x 1/4 in. self tapping screws
C.(2)Torsion Springs
5
6
D.E26 Edison screw base adapter
E.Green ground wire with
#8-32 x 5/16 in. machine screw
and #8-32 hex nut
WARNING
●Read and follow these instructions.
●Risk of fire.MINIMUM 90℃ SUPPLY CONDUCTORS.
●Risk for Fire or Electric Shock:Please consult an
electrician for installation if uncertain of housing
electrical systems.
●Risk of electric shock.To avoid possible electical shock,
be sure that power supply is turned off at fuse box or
circuit breaker before installing or servicing fixture.
●To prevent wiring damage or abrasion,do not expose
wiring to edges of sheet metal or other sharp objects.
！
A.LED module and connector
G.Connector
F.(3)Wire Nuts
RIS0233
1/4
Item number:
F9806-30-3K
F9806-30-4K
INSTALLATION INSTRUCTION MANUAL
