Sunset Swings 422L, Руководство по сборке и эксплуатации

Страница: 4 / 17

Page 3
Positioning Your Swing
1. The swing is designed to be installed on a firm level surface.
2. There should be a minimum clearance of five feet in front and back, and two feet on
each side of your swing. It should be placed in an area where children will not stray
or walk into the path of the swing.
3. Be careful placing the swing too close to a structure as severe injury might occur if
someone gets caught between the structure and the swing or damage might occur if
the swing hits the structure.
Tools required for assembly
1. 10, 14, 17 and 19 mm box or ratchet wrench
2. 4, 5 and 6 mm Allen wrenches (supplied with the hardware)
Helpful installation hints
1.
At least 2 people are required to assemble this swing. Some parts are
large and heavy. Use care when handling.
2. Identify all of the parts for your swing. Empty the boxes and lay out the parts for
identification using the Parts List.
3. Read all the way through the instructions completely before beginning the assembly.
4. Do not tighten hardware completely until instructed. It helps to have some adjustment
for bolt alignment while you are connecting parts. Follow the tightening sequence as
mentioned in the steps.
After you have completed the assembly, recheck
that all hardware is secure and tight.