Sunrise Medical TROPHY 20 Скачать руководство пользователя страница 81

Страница: 81 / 104

Service instructions | 81

Trophy 20

Service instructions | 81

Mount the lap strap with roll-up to the Master seat

Preparation

• Switch off the scooter with the ignition key.

Instructions

The following operations are required to mount the lap
strap with roll-up to the Master Seat:

Note!

Suitable work area required!

• Unzip the cover from the Master seat
• The frame has a hole on the left and right side. Make on

both sides (at the level of the hole) a notch in the cover.

• Left side: The locknut needs to be mounted on the inside

of the frame.

• Right side: The plastic bushings and pivot van needs to

be used on the right side.

• When everything is mounted, place the black cap on the

bolts.

• Turn

the

aps of the cover with velcro inside and close

the zipper carefully. Fold also the zipper back inside.

Relevant article numbers

• 1015507 Lap strap with roll-up for Master Seat

Tools used

• Socket, 17 mm

Содержание TROPHY 20









































































































Результаты поиска

Содержание TROPHY 20

Отзывы:

Похожие инструкции для TROPHY 20

Бренды по названию

Популярные бренды

Sunrise Medical TROPHY 20, Руководство по обслуживанию

Результаты поиска

Содержание TROPHY 20

Отзывы:

Похожие инструкции для TROPHY 20

Бренды по названию

Популярные бренды