Sunrise Medical Quickie RX Скачать руководство пользователя | Manualshive

Страница: 41 / 47

background image

37

RX/RXS

Issue 5

Lap belt instructions

The positioning belt can be used on the Quickie RXS, Quickie 2, Breezy SLTL
and Quickie 2 Millennium wheelchairs.

Quickie RXS:

Quickie 2:

Breezy SL/TL:

Quickie 2 Millennium:

Advice to client

The positioning belt must only be fitted by an
approved Sunrise Medical dealer / agent. The
positioning belt should only be adjusted by a
professional, or a Sunrise Medical approved
dealer / agent.

The positioning belt must be checked on a daily
basis to ensure they are adjusted correctly (see
step 7) and are free from any obstruction or
adverse wear.

Sunrise Medical does not encourage the
transportation of any person in a vehicle using
this positioning belt as a method of restraint.
Please see Sunrise Medical transit booklet for
further advice on transportation.

Maintenance:
Check lap belt, and securing components, at
regular intervals for any sign of frays, or
damage. Replace if necessary.

NOTE:

The lap belt should be adjusted to suit the
end user as detailed above. Sunrise Medical
recommend that the length and fit of the belt
be checked on a regular basis to reduce the
risk of the end user inadvertently re-adjusting
the belt to an excessive length.

«
...
39
40
41
42
43
...
»

Содержание Quickie RX
















































Отзывы:

Нет отзывов

Похожие инструкции для Quickie RX

Бренд: Invacare Страницы: 136

Бренд: C.T.M. Страницы: 16

Бренд: R Healthcare Страницы: 52

Бренд: Quickie Страницы: 64

Бренд: Handicare Страницы: 88

Бренд: Quickie Страницы: 6

Бренд: Sunrise Medical Страницы: 24

Бренд: WOK Страницы: 34

Бренд: Ranger Страницы: 17

COMPACT attract

Бренд: Küschall Страницы: 38

Бренд: Küschall Страницы: 40

Бренд: Dietz Страницы: 152

Бренд: Dietz Страницы: 172

ROHO Nexus SPIRIT NS1414C

Бренд: Permobil Страницы: 72

Бренд: RHYTHM Страницы: 2

Бренд: RHYTHM Страницы: 2

Бренд: Etac Страницы: 48

Бренд: Otto Bock Страницы: 56

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды