930398 Rev. B
X I I I . S u n r i s e L i m i t e d W a r r a n t y
39
X I I . M a i n t e n a n c e
930398 Rev. B
38
A. FOR LIFETIME
Sunrise warrants the frame and quick-release axles of this wheelchair against defects
in materials and workmanship for the life of the original purchaser.
The expected life of this frame is five years.
B. FOR TWO (2) YEARS
We warrant all Sunrise-made parts and components of this wheelchair against defects
in materials and workmanship for two years from the date of first consumer purchase.
C. LIMITATIONS
1. We do not warrant:
• Tires and tubes, upholstery, armrests and push-handle grips.
• Damage from neglect, misuse or from improper installation or repair.
• Damage from exceeding weight limit of 250 pounds (113 kg).
2. This warranty is VOID if the original chair serial number tag is removed
or altered.
3. This warranty applies in the USA only. Check with your authorized supplier to
find out if international warranties apply.
D. WHAT WE WILL DO
Our sole liability is to repair or replace warrantied parts. This is the
exclusive remedy for consequential damages.
E. WHAT YOU MUST DO
1. Obtain from us, while this warranty is in effect, prior approval for return
or repair of covered parts.
2. Return the wheelchair or part(s), freight pre-paid, to Sunrise Mobility Products
Division at: 2842 Business Park Avenue, Fresno, CA 93727-1328.
3. Pay the cost of labor to repair, remove or install parts.
F. NOTICE TO CONSUMER
1. If allowed by law, this warranty is in place of any other warranty (written or
oral, express or implied, including a warranty of merchantability or fitness for a
particular purpose).
2. This warranty gives you certain legal rights. You may also have other rights that
vary from state to state.
Record your serial number here for future reference:
___________________________________________
C. MAINTENANCE TIPS
1. Axles & Axle Sleeves:
Check axles and axle sleeves every six months to make sure they are tight.
Loose sleeves will damage the camber insert and will affect performance.
2. Tire Air Pressure:
Check air pressure in pneumatic tires at least ONCE A WEEK. The wheel locks will
not grip properly if you fail to maintain the air pressure shown on tire sidewall.
D. CLEANING
1. Paint Finish
a. Clean the paint finish with mild soap at least once a month.
b. Protect the paint with a coat of non-abrasive auto wax every three months.
2. Axles and Moving Parts
a. Clean around axles and moving parts WEEKLY with a slightly damp
(not wet) cloth.
b. Wipe off or blow away any fluff, dust, or dirt on axles or moving parts.
NOTE–
Lubricate moving parts with Tri-Flow lubricant (Teflon® based).
3. Upholstery
a. Hand-wash (machine washing may damage fabric).
b. Drip-dry only. DO NOT machine dry as heat will damage fabric.
E. STORAGE TIPS
1. Store your chair in a clean, dry area. If you fail to do so, parts may rust
or corrode.
2. Before using your chair, make sure it is in proper working order.
Inspect and service all items on the “Maintenance Chart”.
3. If stored for more than three months, have your chair inspected by
an authorized supplier before use.
