247556 Rev. B
21
7.0 USING THE SEATING SYSTEM
Quickie
®
Q700-UP
®
M Seating Manual
7.7.4 Delete custom programmed memory position
(Fig. 7.11 - Fig. 7.14)
1.
Remove the rear cover of the backrest and connect a Switch with a 3.5mm Jack to the socket on the
CxSM (Complex Seating Module). (A-Fig. 7.11)
2.
Press the ”Mode” button one or more times until a seat icon appears in the LCD control panel display.
(Fig. 7.12)
3.
Move the joystick to the left or right to select a memory seat position (Fig. 7.13). A seat icon and the
memory description for the relevant position are shown in the LCD control panel display. (Fig. 7.12)
4.
Press and hold the Switch connected to the CxSM (Fig.7.14) and pull the joystick backwards for 6
seconds. After 3 seconds you will hear the programming beep and after 6 seconds you will hear a change
in the beep sound.
5.
As soon as you hear this new sound release the joystick and the button. All memory positions are now
set to the factory setting.
7.7.5 Return to drive mode
Press the ”Mode” button one or more times until a standard display image with speed indicator appears in the
LCD control panel display.
Fig.7.13
Fig.7.11
A
Fig.7.12
Fig.7.14
