22
Q700M Rev.A
1
A
Removal of front, side and rear shrouds
Preparation
Note!
Switch off the wheelchair via remote control
Instructions
Note!
Suitable work area required!
•
Follow the illustrated instruction for removing the front,
side and rear shrouds from the wheelchair.
•
In order to complete this, you must first tilt back chair,
remove the battery cover and electrically disconnect the
power
Tools used
5
Fig. 6.2.15
1.
Unscrew and remove 4 (A) bolts from the top of the shroud
NOTE: Early models may have plastic washers fitted beneath the
shroud that will become lose when the bolts are removed. Be careful
not to lose these and to re-fit then when refitting the shroud.
(Please re-tighten by hand to avoid shroud splitting).
Fig. 6.2.16
2.
Unscrew and remove 2 bolts (B) from the front of the shroud
Fig. 6.2.17
2
B
3
C
Fig. 6.2.16
Fig. 6.2.17
Fig. 6.2.18
Содержание Quickie Q700-UP F
