932208 Rev. A
I X . O p e r a t i n g G u i d e
35
V I I I . S e t - U p , A d j u s t m e n t & U s e
932208 Rev. A
34
A. PERFORMANCE CONTROL SETTINGS
Q-NOTE–
Seek advice regarding checking and
adjusting settings.
1. It is vital to match control settings to your level
of function and ability.
2. Consult your health care professional and your
supplier to select the best control settings for
you.
3. Check and adjust the settings every six to twelve
months.
Adjust the control settings immediately if you
notice any change in your ability to:
•Control the joystick.
•Avoid running into objects.
4. Control Settings can be adjusted by your dealer.
B. DELPHI HAND HELD PROGRAMMER OR DELPHI PC
SETUP STATION (OPTIONAL)
Program settings beyond the ability of the user
can result in serious injury. Consult your health
care advisor before you alter settings.
The Delphi Hand Held Programmer or Delphi PC set-up
station lets you adjust the control settings of the Groove.
You can customize a program or select the standard pro-
gram. Listed below are a few of the many settings that
can be adjusted via the Delphi Hand Held Programmer or
Delphi PC Setu Station. (See Delphi Owners Manual for
full programmable parameters.)
• acceleration rate
• deceleration rate
• turn acceleration
• turn deceleration
• forward speed (max & min)
• reverse speed (max & min)
• turn speed (max & min)
• steer correct
SEATING SYSTEM ADJUSTMENT
A. MANUAL RECLINE OPERATION
The Perfect Fit seating system has two manual recline
options. The first is using a 16mm socket wrench and
the second can be done by turning a knob on the side
of the chair (Figure 3). To recline the chair, rotate this
knob clockwise and turn the knob counter-clockwise to
return the back to a more upright position.
B. POWER RECLINE TILT/LIFT OPERATION
The power recline, tilt, and lift features on your chair
can all be operated using the joystick on your chair.
Follow the instructions below to operate:
1. Make sure your controller is on.
2. Press the On/Off Mode Switch up two times.
3. Move the joystick left or right selecting the
power option (recline, tilt, lift, legrests) you
wish to control.
4. Move the joystick forward or backward to adjust
the selected power option to the desired posi-
tion.
5. Press the On/Off Mode Switch one time to return
to normal operation or continue moving the joy-
stick left or right to adjust the next power
option.
3
