Input Clusters
•
0x0000: Basic
•
0x0003: Identify
•
0x0004: Groups
•
0x0005: Scenes
•
0x0006: On/off
•
0x0702: Simple Metering
•
0x0b04: Electrical Measurement
•
0x0b05: Diagnostics
Output Clusters
•
0x0003: Identify
12. ZigBee Clusters the device supports are as follows:
13. OTA
The device supports firmware updating through OTA, and will acquire new firmware from zigbee controller or
hub every 10 minutes automatically.
Note: 1) Each added device can link and be controlled by max. 30 added remotes.
2) Each added remote can link and control max. 30 added devices.
•
0x1000: ZLL Commissioning
•
0x0019: OTA
11. Setup a Zigbee Network & Add Other Devices to the Network (No Coordinator Required)
Step 1
: Short press “Program” button 4 times to enable the device to setup a zigbee network (LED indicator
flashes twice) to discover and add other devices, 180 seconds timeout, repeat the operation.
Zigbee
Remote
ZigBee Lighting Device
< 10cm TouchLink
Step 2
: Set another device or remote or touch panel into network pairing mode and pair to the network, refer to
their manuals
.
Step 3
: Pair more devices and remotes to the network as you would like, refer to their manuals.
Step 4
: Bind the added devices and remotes through Touchlink so that the devices can be controlled by the
remotes, refer to their manuals.
