Nov/06
MN6000000014
14
can use this ‘Wizard’ to initial the hard disk to the
‘Basic
Disk’
and can then create partition in the drive.
②
In Windows XP: you can right-click on the
‘Stop’
mark,
and then click
‘Initialize disk’
to initial the hard disk to the
‘Basic Disk’
type and can then create partition in the drive.
3.
If the type of the hard disk drive is
‘Dynamic’
, you must change it
to the
‘Basic’
. To do this, right-click on the status area(left area)
of Disk 1, and then click
‘Revert to Basic Disk’
from the options.
Wait for few seconds, the type of the hard disk drive will be
changed to
‘Basic’
type.
4.
To create a new partition in the external hard disk, right-click on
the right area of Disk 1, click on
‘Create Partition…’
, the
‘Create Partition Wizard’
appears, click
Next
.
5.
Select
‘Primary partition’
, click
“Next”
.
6.
Specify the size that you want this partition to be, click
“Next”
.
7.
Assign a drive letter for this partition, please use the default value,
and click
“Next”
.
8.
Refer to the figure shown below, select
‘Format this partition
with the following settings’
, choose the File System, and specify
a name for the Volume Label, select
‘Perform a Quick Format’
,
then click
“Next”
.
9.
Click
“Finish”
, now the formatting is proceed, after the process is
