Nov/06
MN6000000014
10
the external hard disk to computer, and make sure it is
recognized.
2.
Go into the MS-DOS mode by click on
Start
Ö
Programs
Ö
MS-DOS Prompt
.
3.
At the DOS prompt, type
‘FDISK’
and press
Enter.
4.
In the first screen of FDISK, answer the question: Do you want
to enable large disk support?
Y
if you want to create a partition larger than 2GB(FAT32).
N
if you want to create a partition small than 2GB(FAT16).
5.
The next screen is ‘FDISK OPTIONS’,
IMPORTANT: you must type 5 on this screen to change the
current fixed disk drive, the default fixed drive set by FDISK is
your internal hard disk, if you don’t change it to the external hard
disk, the data of internal hard disk will be
destroyed.
Note: If the option 5 doesn’t appear on this screen means the
