Sunquest SQ 1000S, Инструкция по сборке и эксплуатации

Страница: 9 / 15

5
Using Your Sun Canopy
Once you have read Before You Tan and Exposure Times (located on page 4), you are
ready to use your sun canopy. Proceed as follows.
WARNING! Your sunbed is designed for individual use. Only one pair of protective
goggles is provided. Always wear these or another approved pair of goggles. You
should never look at the lamps when turned on without wearing the appropriate
protective goggles. Regular sunglasses
do not provide adequate protection from
ultra-violet light.
Step 1. Release the buckle on the handling strap and raise the canopy
by lifting the swivel arm. Extend the canopy to its fully
open position.
Step 2. Set the timer (on the top of the canopy) to the desired number
of minutes (after first determining the proper time period from
the table on page 4). The lamps will turn on as soon as you
move the rotary dial from the
“ 0 ” position.
Step 3. Lie on a bed or cot and position the canopy over your body.
Grasp the canopy at its edges near its center pivoting point and
pull toward your body. For best results position the canopy
within a couple of inches from your body.
Step 4. When the timer reaches 0, the lamps will automatically turn off.
Operation-Using Your Sun Canopy