15
Care & Maintenance-Timer Maintenance
Timer Maintenance
Your
SunQuest
sunbed is equipped with a backup shut-off timer which will
automatically turn off the sunbed in the unlikely event of a malfunction of the pri-
mary timer. This important safety feature also prevents the user from re-setting the
timer before the end of the pre-set maximum time interval. The electronic timer
limiting circuit is automatically reset each time the primary timer is turned to the
OFF position.
Annually, or whenever your sunbed is re-lamped, check the operation and accuracy
of the timer system as follows. DO NOT perform these tests with a person in the
sunbed.
Step 1.
Obtain an accurate watch capable of measuring in seconds.
Set the timer to its maximum interval. Using the watch, time
how long the lamps remain on. The lamps should shut off
within plus or minus 10% of the maximum timer interval.
Step 2.
Set the timer to the maximum time interval. Wait ten minutes,
then turn the knob back to the maximum time position. The
electronic time limiting circuit should turn the lamps off at an
elapsed time equal to approximately 10% beyond the maxi-
mum timer interval, even though the primary timer continues
to show time left.
Call ETS Customer Service if your timer does not operate properly, or if you
experience difficulty with these tests.
Содержание Pro 14SE
Страница 1: ...A S S E M B L Y A N D U S E R G U I D E M O D E L P R O 1 4 S E 21162A ...
Страница 22: ...NOTES ...
Страница 23: ...NOTES ...