5
How your dishwasher cleans
Getting Started
Your dishwasher cleans by spraying a
mixture of hot water and detergent through
the spray arms against soiled surfaces.
The dishwasher fills with water covering the
filer area. Water is then pumped through the
multiple filter and spray arms. Separated soil
particles go down the drain as the water is
pumped out and replaced with clean water.
The number of water fills will vary with the
cycle being used.
1.Load dishwasher (See preparing and loading
dishes).
2.Add detergent (See Fill detergent to the
dispenser).
3.Add rinse aid, if needed (See Fill rinse aid
dispenser).
4.Select desired CYCLE (See Cycle Chart). The
indicator light beside the pad will glow when
selected.
5.Select desired FUNCTIONS, the indicator light
beside the pad will glow when selected.
6.To start, press Start/Cancel (See Start/Cancel)
pad.
7.Close the door, then the machine will start to
work.
1. Your dishwasher has the top control panel.
The door should be opened first if you want
to operate the machine.
2. To start a cycle, the door must be closed
Cycle times are an estimation and will vary with
different options. Water temperature is important
to activate the dishwasher detergent and melt fatty
food soils. An automatic sensor will check the
incoming water temperature. If the water is not
hot enough, timer will be delayed for the water to
be heated to the desired temperature. Even when
HI-TEMP is selected, often times, water still need
to be heated more to handle heavier soil loads.
Features of your new dishwasher
Wash Cycle Selections
NOTE
within 4s after press Start/Cancel.
