Installing control knob
1. Rotate the turning shaft counter-clockwise to the end.
2. Align the knob scale point to “OFF” position and firmly push the knob into
shaft.
Control panel
Maintaining the product
Unplug the cord before any cleaning is done.
To clean the ceramic plate, use a soft sponge with dishwashing liquid. Then
wipe clean with damp towel.
Clean fan intake with vacuum whenever necessary.
DO NOT IMMERSE THE COOKTOP IN WATER TO SOAK. THIS
WILL DAMAGE THE COOKTOP.
NOTE
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harm to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect equipment to an outlet that’s on a different circuit than the receiver.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
3
8
