Sunnydaze Decor WAR-840 Скачать руководство пользователя страница 7

• Children and adults should be alerted to the hazards of high surface temperatures and should stay away

to avoid burns or clothing ignition.

• Young children  MUST BE carefully supervised at all times when they are in the area of this appliance.

• Clothing or other flammable materials shall NOT be hung from the appliance or placed on or near the

appliance.

• Any guard or other protective device removed for servicing the appliance shall be replaced prior to

operating and use of this appliance.

• Installation and repair(s) should be done by a Qualified Service Technician.

The appliance should be inspected before use. If you suspect there are issues, contact a Qualified

Service person.

More frequent cleaning may be required as necessary.

It is imperative that the control compartment, burners and circulating airways of the appliance are kept

clean.

When APPLICABLE:
• Keep gas tank at least 5 feet away from unit when lit (if external tank).
• Allow Fire Burner / Column to cool down completely before placing on lid.

• Keep the hose away from any pathways to eliminate any accidental damage (if external tank).

• DO NOT use Fire Table / Column while lid is installed.

Always remove the lid while Fire Table / Column is in use.

Use only the Regulator (12/19) and Hose( 12)  assembly provided with this unit.

 

Replacement parts must be supplied directly by manufacturer.

Inspect the Burner (08 ) before use of this unit.

If the Burner (08) shows any kind of damage, DO NOT operate the appliance.

 

NOTE: You must follow all steps to properly assemble this Fire Table / Column.

Make sure the Gas Valve is turned “OFF” before assembling.

DO NOT attempt to assemble without proper tools.

7

Содержание WAR-840


















Отзывы: