3.) Turn
(Part A) BED
Upside down.
4.) Attach
(PART J) REAR AXLE SUPPORT
ASSEMBLY
to rear of bed using
(PART T)
M8X20 CARRIAGE BOLTS, (PART O) M8
WASHERS
and
(PART P) M8 NYLON
NUTS
.
5.) Attach
(PART K)
Left and Right
REAR
AXLE BRACES
to
(PART A)
BED
using
(PART T)
M8X20 CARRIAGE BOLTS
(PART O) M8 WASHERS
AND
(PART P)
NYLON NUTS
per side.
6.) Attach
(PART G)
the
YOKE
and
FRONT
AXLE SUPPORT ASSEMBLY (PART F)
by loosening middle nut to slide
Yoke
onto
long bolt
. THEN Attach
FRONT STRUT
(PART H)
to long bolt and tighten nut.
7.) Attach (
PART I) FRONT AXLE
CONNECTION BAR
using
(PART S) M8 x
20 HEX BOLTS, (PART O) M8 WASHERS
and
(PART P) M8 NYLON NUTS.
Insert
PIN of
YOKE
into middle hole of
PART I
secure with washer and
COTTER PIN
(PART V)
Tighten bolts fully.
