Page 2 / 2
USE & CARE
• For outdoor use only.
• Keep away from children
─
this is not a toy!
• Keep the solar panel clean by gently wiping it with a soft, damp cloth. Clean solar panels will absorb more sunlight.
• Never use chemicals or abrasive materials to clean the lights or solar panel.
• Store in a dry, warm, indoor location during inclement weather and freezing temperatures.
• Do not allow the unit to freeze. Freezing temperatures will damage the internal components.
• Turn the units off before storing.
• If installed in a grassy location, remove the disks and stakes from the ground before mowing or cutting the grass.
This product uses a rechargeable battery. When the battery can no longer be used, it should be removed from the unit and recycled.
The battery must not be incinerated or composted. Recycle the battery in accordance with local laws and regulations.
TROUBLESHOOTING
• Ensure the power button is turned to the 'ON' position.
• This product is designed to only illuminate at night. Make sure the light sensor is not receiving too much ambient light.
• If the light only works for a short time, attempt a 'Boost Charge':
- Turn the power 'ON' and place in a location where the solar panel receives direct sunlight for at least 8 hours.
- Turn the power 'OFF' at night to conserve the battery.
- Repeat this process for 2-3 days.
IMPORTANT INFORMATION
Any modification to the product or failure to follow recommended care will void the product warranty.
11/2020
JW-216
ASSEMBLY
A
B
Identify the different style
stake pieces.
A
has a short notch on the
thicker end of the stake.
B
has a long notch in the
tapered end the stake.
Push stake A all the way
onto stake B until the ends
are aligned with each other.
Insert the assembled
stake onto the bottom of
the disk light. Push the
stake in until secure.
Press the button on the bottom of the disk to turn
the light on. Place in a location that recieveds
full, direct sunlight for at least 6-8 hours per day.
STEP 1
STEP 2
STEP 3
